2 in 1 Surge Protector for Camera, Combined Lightning Arrester for Power Network

1. Maximum current capacity: 20KA (8 / 20 μ s), the power line adopts two-stage composite balance safest line, AC can not be divided into zero / fire line, zero / fire line can be connected randomly (DC needs to be divided into positive and negative poles), differential mode (line to line) and common mode (line to ground) full mode protection, low residual voltage, especially suitable for outdoor equipment, where lightning energy is large and residual voltage value is strict.
2. Two stage series compound protection is also used in the network line, differential mode (line to line) and common mode (line to ground) full mode protection, with low residual voltage and long service life;
3. It can effectively prevent equipment damage caused by the instantaneous increase of potential difference between power supply and network lines;
4. The integrated structure is adopted to minimize the volume and occupy no space under the condition of conforming to relevant parameters;
5. Power supply surge protection port with LED failure indication (green: normal; off: failure);
6. The power supply terminal adopts E-type terminal, which meets the requirements of vibration test. The vibration test does not disconnect, which avoids the disadvantages of plug-in type terminal. Easy to install.

technical parameter
Installation method of lightning arrester
1. The lightning arrester is installed in series in front of the protected equipment port (the "input" identification terminal is connected to the line, and the "output" identification end is connected with the protected camera), and the PE terminal is connected to the lightning protection grounding grid.
2. Line terminal connection method (power supply part): AC power supply: both ends shall be connected with "L1-L1" and "l2-l2" respectively, without dividing zero live line;DC power supply: both ends should be connected with "L1-L1" and "l2-l2". DC is divided into positive and negative poles. The positive pole is connected to L1, and the negative pole is connected to L2. Do not connect it wrong.
3. RJ45 network signal line connection method: Series installation, RJ45 crystal head can be directly inserted. Two
4. The section of grounding wire should be ≥ 4mm and as short as possible. The installation of the lightning protection product requires that the grounding resistance is less than 4 ohm, and the lightning protection performance is the best when the grounding wire and grounding resistance are qualified.
5. The lightning arrester is free of maintenance. The working condition of arrester should be checked and recorded in time after thunderstorm.


FAQ 
Q: Are you a factory or a trade company?  
A: We are the factory. 

Q: Where are your products distributed?   
A: Our products are distributed all over the world, Main market are Europe, North America, the United Arab Emirates, Africa and so on. 

Q: Can I have a sample?    
A: Yes, but according to our company's policy, we provided free samples, while you should pay the freight fee; the sample can be delivered by TNT/DHL/UPS/FEDEX. 

Q: Which port is the nearest from you?   
A: Guangzhou port or Shenzhen Port or Hong Kong port.

Q: What's your lead time? 
A: Sample lead time: 3~5 working days. Mass production: usually 10~30days.
For big orders, honestly, it depends on the order quantity and designs. 

Q: When can I get the price? 
A: We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry as priority.
 
Q: Can you do the design for us? 
A: Yes, we have a professional team having rich experience in molding design, electrical system developing and manufacturing. Please just tell us your ideas and we will help you to carry out your ideas into a perfect artwork. You can pay for the molding fee and own the mold by yourself or we can cooperate on the molding. 

Q:How to pay?
A: We accept T/T, Paypal, Western union, L/C, Trade Assurance