Ethernet Surge Protector Protects The Switch/Computer/Camera RJ45 Port CAT6 1gbit Oms-RJ45/1000-ISO

Product introduction
Modern communication systems, which are based on Ethernet, offer today a lot of possibilities of communication and data exchange. Overvoltages, which arise by galvanic, capacitive or inductive couplings in data lines, can destroy these devices. Particularly high-speed networks are today the life veins of almost any company. Here a good and professional protection is nessesary.
For already existing networks and also future networks up to 1GBit offers an optimized overvoltage protection device for high-speed networks.  
Supports of  Ethernet with rated currents up to 0.5A with optimized overvoltage protection in the Channel up to 1GBit. This corresponds to a Channel performance conform ISO/IEC 11801 Amd. 2 of the CLASS EA and CAT6A after TIA/ANSI,Downward compatibility is naturally likewise ensured.

Functional features
1, Plugable for quality cabling
2, Powerful overvoltage protection
3, Suitable for channel-link up to 1GBit
4, Installation on 35mm DIN rail (optional) or direcly at end device

technical parameter
Product Size

Installation method of lightning arrester
1. This series of surge protective device is suitable for RJ45 interface of lpz2-lpz3 partition interface of lightning protection zone. It is generally installed in series on terminal network equipment.
2. The product can be directly installed in series at the front end of the protected equipment (or system), and the closer it is to the protected equipment (or system), the better;
3. The input terminal (input) of the product is connected with the signal line, and the output terminal (output) is connected with the protected equipment, which can not be reversed;
4. The PE line of this product must be strictly equipotential connected with the lightning protection system, and the grounding resistance shall not be greater than 4 Ω, otherwise the working performance will be affected;
5. The product is grounded with the shortest possible wire connection. The lightning arrester adopts terminal grounding mode and must be connected with lightning protection ground wire. The shielding wire of the signal can be directly connected to the grounding terminal;
6. If the lightning arrester is installed under the condition that it does not exceed the requirements, it does not need long- term maintenance, and only needs routine maintenance of the system; if there is a problem in the signal transmission during the use process, the signal transmission returns to normal after replacing the lightning protector, which indicates that the lightning protector has been damaged and needs to be repaired or replace.

Precautions for installation of surge protector
1. All ports of lightning arrester output end are connected with the protected equipment;
2. Do not connect the input and output circuits in reverse or wrong way;
3. The closer the lightning arrester is installed at the front end of the protected equipment, the better the effect is;
4. The equipment needs regular inspection and must be replaced immediately after the deterioration of the product;
5. The grounding must be good and the grounding resistance should not be greater than 4 ohm

FAQ 
Q: Are you a factory or a trade company?  
A: We are the factory. 

Q: Where are your products distributed?   
A: Our products are distributed all over the world, Main market are Europe, North America, the United Arab Emirates, Africa and so on. 

Q: Can I have a sample?    
A: Yes, but according to our company's policy, we provided free samples, while you should pay the freight fee; the sample can be delivered by TNT/DHL/UPS/FEDEX. 

Q: Which port is the nearest from you?   
A: Guangzhou port or Shenzhen Port or Hong Kong port.

Q: What's your lead time? 
A: Sample lead time: 3~5 working days. Mass production: usually 10~30days.
For big orders, honestly, it depends on the order quantity and designs. 

Q: When can I get the price? 
A: We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry as priority.
 
Q: Can you do the design for us? 
A: Yes, we have a professional team having rich experience in molding design, electrical system developing and manufacturing. Please just tell us your ideas and we will help you to carry out your ideas into a perfect artwork. You can pay for the molding fee and own the mold by yourself or we can cooperate on the molding. 

Q:How to pay?
A: We accept T/T, Paypal, Western union, L/C, Trade Assurance